Once you restart the Firestick TV to solve a problem, another possible problem that may arise is that the Fire Stick remote control will not synchronize. The Fire Stick remote control allows you to navigate and control Fire TV, however, if there is a pairing problem, it simply will not work and hinder your experience.
However, this does not mean that you are completely stuck with it forever. The problem can be solved quickly by following some troubleshooting solutions. But first of all, you must solve the problem and then pair the Fire Stick remote control.
How to fix Fire Stick Remote that just doesn’t match?
Here we will discuss some of the steps you can try when your Fire Stick remote does not sync.
Restart the Fire TV Stick
Then, just restart the Fire TV stick and now, as mentioned in the troubleshooting step, you must restart Fire Tv again. Restarting is a very easy step, but it can work wonders to solve the problem when the Fire Stick remote does not match.
All you need to do is disconnect the Fire TV and then restart it again. Then, plug the Fire TV back in and try pairing the Fire TV remote again.
Change the remote control battery
If your Fire TV Stick remote control does not match, then there is a good chance that the batteries in the remote control should be replaced or simply not aligned properly.
Remove the batteries from the remote control. And then wait a minute. Then, place the same batteries in the Fire TV remote control and try to pair it with the device. If this does not work, then you should replace the batteries with the new ones. Also, remember that before installing the batteries clean the compartments.
Use the start button to pair the Fire Stick remote control
You can use the start button to solve the problem when the Fire Stick remote does not sync. Approach the remote control and then press the start button on the remote control.
Press and hold the button for at least 20-30 seconds. Then, a message will appear on the screen to confirm. This means that the Fire Stick remote control has been paired correctly with Fire TV.
Fire Stick Remote Reset
If the troubleshooting solutions mentioned above do not work, then you may need to reset the Fire Stick remote control.
- Turn off the Fire TV Stick.
- Now, press the menu button, back button and navigation at the same time for 20 seconds.
- Release the button and then turn on the Fire TV Stick remote control.
- Then, press and hold the home button for 20 seconds to pair the remote control.
If the steps mentioned above do not work, then you must change the remote control. However, you can also contact the Fire TV Stick experts for technical assistance. The team of experts helps you and guides you through the steps when the Fire Stick remote control does not pair with the transmission device. In addition, they have the knowledge and skills necessary to reach the root cause and solve the problem accordingly.
Fire Stick Remote Won’t Pair
Many times, when you have finished restarting the Fire TV, another problem that arises is that the remote control does not synchronize. This simply means that you can hardly do anything on your Fire TV device, and the pain is real. The Firestick remote control allows you to stream and browse different things on your Fire TV, however, it can cause many problems when the Firestick remote control will not be paired after the factory reset.
Can you use the fire TV stick again? Can you solve the problem with the pen remote control? Of course yes! All you need to do is solve the problem on the remote control and link it in the right way to use it efficiently
Firestick remote control will not be paired after factory reset 2020
These are some of the tips that can help you solve the problem when your Firestick remote control will not be paired after the factory reset with your fire TV.
Restart the Fire TV Stick
The first step you should follow is to restart the Fire TV stick. Do not underestimate this method, as it can solve many problems.
As soon as you see the association of the remote control on the screen, but the remote control does not match after the factory reset, you must remove the plug from the socket. After a few minutes, connect the power supply to your fire TV device and wait for it to restart again. Now, wait for it to connect again and try to pair the remote control with the start button.
Remove the battery from the remote control
You may think otherwise, but many times the batteries in the remote control are not aligned correctly. In this case, the remote control will not be paired. Therefore, remove the batteries and store them for at least 30 seconds. After that, place the batteries in the correct way on the remote control. Now combine it with the Fire TV stick.
SOLVED: Why is my remote pair not? – Amazon Fire TV Stick
Replace old batteries with new ones
One of the most common reasons why the remote control does not pair after the factory reset is because the batteries have already run out. To verify this, you must insert new batteries into the remote control and then try to pair it. If it works, then depleted batteries should be the reason behind the damaged remote control.
You have to remove the batteries and properly clean the metal connectors with a clean cloth.
As soon as the cleaning is finished, reinsert the batteries and turn on the Fire TV stick by restarting the Fire TV stick. Now try to pair it with the arrow remote control.
Cannot pair a Fire TV remote
Clean the battery compartments
Often, dirt and dust particles tend to accumulate in the battery compartments and could be the reason why the remote control does not match after the factory reset. To resolve this problem: Fire Stick Remote will not be paired
Pair it correctly using the start button
Move closer to your Fire TV and now press and hold the home button on the remote control for at least 30 seconds or wait until you receive a confirmation text while trying to pair the remote control. If the devices have been paired correctly, you will receive a confirmation message in the right corner of the screen at the bottom.
Do not lose your patience, as you may have to repeat the process a couple of times while pairing the remote control. If your fight does not match, try pressing the start button for a few minutes and then matching again.
If you can’t match the remote control
Amazon.com Help: Can’t Pair or Use Fire TV Remote
Pairing Using Other Buttons
While using the home button, it is the correct way to pair the remote control of your power button. Many times, you can pair the fire key remote control using other buttons such as a play button, a pause button, a medium round button. Try to pair by pressing these buttons for at least 30 seconds and it could work for you.
Search for locked buttons
It may sound very obvious or too simple to try, but many times the buttons locked on the remote control are stuck and that is why the remote control does not synchronize after the factory reset. Therefore, try to verify if the button is not locked and then link it again.
Remove another TV fire in close proximity
While pairing the remote control, make sure there is no other fire TV located nearby. This is because any fire TV in the vicinity can affect the pairing process, and could be the reason why the remote control does not pair. Turn it off, restart the fire TV device and now pair using the remote control by pressing the home button.
The FireTv application does not match the fire bar
If you still cannot match the remote control
Reset Firestick Remote
First, remove the plug from the Fire TV device. The fire arrow must be off. And then you must press and hold the menu button, the back button and the navigation button at the same time on the Fire TV device for at least 20 seconds. Now, release all the buttons simultaneously while turning on the Fire TV stick. You can now pair the arrow remote control by pressing the start button for half a minute.
However, if it doesn’t work, you may have to contact a Frestick television expert. They will help you to match the remote control correctly.
Buy another remote control
If you have tried all the solutions mentioned in this blog and still your remote control will not be paired after the factory reset. Then you may need to buy a new remote control. As sad as it may seem, but now you have no other choice.
Try to buy a remote control of the same generation, as it will pair properly with your fire TV.
Fire TV Stick Remote does not match
You can try to borrow someone’s ignition key remote control to verify if it is compatible with your fire TV and then buy it. Buy a new one or try the steps again to repair it.
If your remote control does not pair after the factory reset, then there could be many reasons behind it. We have covered some of the most common problems that may arise between pairing the arrow remote control correctly. The solutions mentioned in this blog are likely to solve their pairing problems. However, if you still experience pairing problems on the remote control of your prick for detailed assistance.
Firestick remote control will not be paired after factory reset
The Amazon Fire TV is one of the most transmitted devices possibly for all good reasons. However, sometimes pairing the Fire TV remote control can be a difficult task. We will provide you with the necessary steps that can help you pair the Fire TV remote control and enjoy transmitting your favorite things on the Amazon Fire Stick remote control will not be paired after the factory reset.
Fire TV comes with a remote control and the latest Amazon Fire TV update has a modified version of the remote control. The remote control has some additional features such as power control and mute buttons that make the operation of the remote control super smooth and easy. However, many times users find it difficult to match the Fire TV remote control and experience a number of problems.
In this blog, we will analyze the steps that can help you pair the Fire TV remote control correctly so you can use all the features of your Amazon Fire TV.
How to Pair a Fire TV and Fire Stick Remote
Verify the compatibility of the remote control: the firewood remote control will not be paired after factory reset
Even before you start pairing the Fire TV remote control, it is important to make sure that the remote control you are going to use is compatible with Amazon Fire TV. Also, check if the remote control batteries are charged and inserted correctly. In addition, you should also check if the remote control is in the proper range of Amazon Fire TV. While checking the batteries in the fire tv remote control is a basic step, many people forget to verify the compatibility of the remote control. If the Fire TV remote control is not compatible with Fire TV, then you should not waste time pairing the Fire TV remote control, as it simply will not work.
Restart Fire TV
You can try restarting the Fire TV. To restart, you can try the following two methods. You can first try to disconnect the device and then plug it back in. Doing this can also solve other problems. The other method is to use the Fire TV remote control to restart. Fire Stick remote control does not pair after factory reset To do this, you must press and hold the play or pause button at the same time for 10 seconds or more. Now, restart the device by selecting it in the menu option.
Fire TV Stick Remote will not be paired
One reboots the device; You can try to repair the device by pressing and holding the play / pause button.
If you cannot solve anything or have difficulty pairing the Fire TV remote, call the Fire TV professionals
Remove the batteries from the Fire TV remote control: the Fire Stick remote control will not be paired after the factory reset
While pairing the remote control, be sure to check the batteries. As silly as it may seem, but many times the problem is with batteries and nothing else. Try replacing the batteries with the new ones, as some fire TV remote controls will only work with new batteries.
If you do not want to add new batteries, try to remove the batteries and keep them out for 15 to 20 seconds. Then, place the batteries correctly in the compartments.
Many times, you will find that the battery compartment is full of dust and dirt. It may be the reason why the remote control batteries do not work properly. To solve this problem, you can clean the battery compartments and metal connectors with a clean cloth or even with tissue paper; The firebar remote control will not be paired
Device verification is paired
Before pairing the Fire TV remote control, you must understand why the remote control does not synchronize or the Fire Stick remote control will not synchronize after the factory reset. Be sure to check if the device is paired correctly with the remote control. To verify this, you must go to the configuration option.
Choose the configuration option, now choose the Bluetooth option and controller. Then verify the device, it will be connected.
Check the locked buttons
Many times, the buttons on the remote control lock and, as a result, get stuck in the middle. Try checking the buttons and start pairing the remote control later.
Check the distance from the Fire TV
While pairing the Fire TV remote control, make sure the other Fire TV devices are far away. Or you can turn off the fire TV, as it could interfere with the pairing. Turn it off, restart it and then try pairing it again: the prick remote will not be paired
Reset Fire TV remote
Turn off the fire television. Now press and hold the menu button three times, the back button and the left of the navigation key, all at the same time. Now, turn on Fire TV while releasing all the buttons at once. Now, try pairing the Fire TV remote on the screen for 30 to 40 seconds.
Try using the Fire TV Remote application: the Fire Stick remote control will not be paired after the factory reset
If nothing seems to work, you can try using a remote Fire TV application. Amazon’s remote application can also be installed on your Android, iOS, iPad and tablet mobile phones.
You can find the application in Play Store and Appstore and it’s absolutely free.
You can download the remote application and use it for as long as your remote control does not pair. However, if you find that using remote applications is better than using the real remote control, you can always use the application instead of the transmission. The application works in the same way as the real remote control along with some additional features.